Question 1

Why isn’t IQ Battery 5P backwards compatible with prior IQ Batteries or IQ System Controllers?

Accepted Answer

IQ Battery 5P uses high speed wired connections to communicate with other Enphase Energy System equipment. This allows for faster performance, improved commissioning, greater installation distances, and a better installer and homeowner experience.  IQ Battery 5P is therefore not compatible with any prior generations of the Enphase Energy System which use Zigbee wireless communication.

Question 2

How can existing IQ Battery owners or Sunlight Backup system owners add (more) IQ Battery?

Accepted Answer

Existing system owners can add more IQ Battery 3/3T and 10/10T to their system without upgrading any other components.

Question 3

Will there be an IQ Battery 10P (cover)?

Accepted Answer

No, Enphase is not planning to ship a cover for 2 units. IQ Battery 5P units ship in the same box as their cover, reducing the possibility of damage and simplifying inventory management compared with IQ Battery 10T.  Enphase IQ Battery 5P is UL9540A certified and, where allowed by local code, can be installed 3 inches apart to minimize the storage footprint. Additionally, installers can leverage the new Enphase pedestal (to be released later this summer) for floor mounting in front of a wall mounted battery.

Question 4

Will M Series sites be able to retrofit with IQ Battery 5P?

Accepted Answer

M Series sites require use of a legacy Envoy S Metered. In states that have not yet implemented IEEE 1547:2018, you can add a Comms Kit 2 accessory (to be released later this summer) to solar only sites with M Series Microinverters in order to add IQ Battery 5P.  If the property is in a U.S. state that as adopted IEEE 1547:2018, the site cannot add IQ Battery 5P without first upgrading to an IQ Microinverter system inclusive of an IQ Combiner (which is IEEE 1547:2018 compliant).

Question 5

What is the PV:Storage ratio for IQ Battery 5P?

Accepted Answer

The PV:Storage ratio is determined by the model of microinverter in use, so accurate sizing calculations should be completed (see latest Enphase Energy Planning Guide).  When used with IQ8 Microinverters, IQ Battery 5P has no solar-to-storage ratio limitations.

Question 6

Is there a breaker kit version of IQ System Controller 3/3G?

Accepted Answer

A universal hold down kit will be included with all IQ System Controller 3/3G units enabling installers greater freedom in sourcing compatible breakers.

Question 7

Why does IQ Battery 5P offer a 15-year limited warranty?

Accepted Answer

One of the Enphase key values is quality. Enphase has demonstrated its commitment to quality through eight generations of microinverters and two prior generations of battery products. The learnings associated with these products has enabled Enphase to offer another industry-leading warranty with our 3rd generation battery product.

Question 8

Where is IQ Battery 5P made?

Accepted Answer

The IQ Battery 5P was designed by Enphase Engineering teams in California, New Zealand and India. Micro inverters in the 5P are manufactured worldwide.  The product is currently assembled in China.

Question 9

Which countries will the IQ Battery 5P and System Controller 3/3G be released?

Accepted Answer

The products will be available in all 50 states and Puerto Rico. The product is not yet released in Canada, Mexico, or other US territories. Additional details on the releases for these markets will be available soon.  Please contact your local Enphase Sales representative if you are interested in additional details.

Question 10

What Enphase components are compatible with IQ Battery 5P?

Accepted Answer

IQ Battery 5P is compatible with all IQ Series Microinverters. IQ Battery 5P can also be installed with M Series Microinverters in states that have not yet adopted IEEE 1547:2018.  	 			IQ Battery 5P works exclusively with IQ System Controller 3/3G and IQ Combiner 5/5C. It is not compatible with prior generations of Enphase Energy System equipment which use wireless Zigbee communication including IQ Battery 3/10/3T/10T, IQ System Controller 1/2. This is because the new components require Control cabling between components instead of wireless. 	 			Older IQ Combiners and standalone IQ Gateways can be made compatible with 3rd generation components by adding the Comms Kit 2 accessory (to be released later this summer).

Question 11

Can installers use off-the-shelf CAN cables?

Accepted Answer

For the best performance, we recommend using only Enphase Control cabling (CTRL-SC3-NA-01). The Enphase Control cable is UL approved and can be run alongside the AC cables inside conduit runs.  Commissioning times and system performance promised by Enphase are dependent on using the Enphase Control cable.

Question 12

What’s the best system for maximizing NEM 3.0?

Accepted Answer

The specific details of the use case and site are key to determining which Enphase product combination would currently best support NEM 3.0 based on the 150% of Storage / PV kW rule 	 			Both IQ Battery 10T/3T and IQ Battery 5P are good solutions for NEM 3.0.  	 			IQ Battery 5P solution: 	IQ Combiner 5/5C + IQ8 PV + IQ Battery 5P with PCS for PV and Battery Oversubscription and Export Only mode 	HW and basic system available at launch i.e., SG4 	PCS for export only in Q3 2023 	PCS for PV + Battery Oversubscription to avoid main panel upgrades Q4 2023 	 			IQ Battery 10T/3T solution: 	IQ Combiner 4/4C + IQ8 PV + IQ Battery 10T/3T with PCS for PV and Battery Oversubscription and Export Only mode 	HW and basic system available at launch i.e., SG4 	PCS for export only in Q3 2023 	PCS for PV + Battery Oversubscription to avoid main panel upgrades 1H 2024

Question 13

What Power Control System (PCS) features will the Enphase Energy System 3.0 have and when will they be available?

Accepted Answer

PCS is a set of software-enabled features and settings that installers can configure during installation and commissioning. These are greatly expanded with the 3rd generation of the Enphase Energy System. At launch in June 2023 the Enphase Energy 3.0 system will support: 	Main panel upgrade avoidance for 	Grid forming configurations with IQ Battery 5P and IQ8 Microinverters as well as 10T/3T and IQ8 	Grid tied configurations with IQ8 Microinverters  	Increasing battery capacity for  	Grid forming configurations with IQ Battery 5P 	Grid tied configurations with IQ Battery 5P  	Aggregate power export control to meet utility requirements for 	Grid forming configurations with IQ Battery 5P and IQ8 Microinverters 	Grid tied configurations with IQ8 Microinverters  	Import-only mode for IQ Battery 5P to ensure NEM integrity and avoid feeder transformer upgrades.

Question 14

How much charge does an IQ Battery 5P lose during the day?

Accepted Answer

After monitoring your batteries for a while, you may notice that they lose a small amount of charge even when you're not using them. This is normal and is something the industry calls tare loss. All home batteries will use some charge throughout the day to power standby systems like the Battery Management Controller or inverters. It's similar to an electric vehicle losing some range overnight, although the mechanics for why and how it happens are slightly different. This isn't unique to Enphase and is a part of all home batteries regardless of the manufacturer.  For every IQ Battery 5P in an Enphase Energy System, you may notice approximately 150-400 Wh of tare loss per day based on your battery profile. This may vary a bit from system to system depending on how often it's idle and not actively generating solar power. Because we always want to accurately represent where your energy is going, the charge and discharge trends in the app will update normally when this happens.

Question 15

Does every IQ Battery 5P require a Communications Kit?

Accepted Answer

Every site requires only one Communications Kit (SKU: COMMS-KIT-INT-02) that plugs into the IQ Gateway through a USB connector.

Question 16

If I have an existing site, should I purchase the bundled SKU (ENV-IQ-GWM-CK2-INT-KIT)?

Accepted Answer

No. For an existing site, you can continue to use the existing IQ Gateway and simply plug in the Communications Kit 2 INT (COMMS-KIT-INT-02). However, the existing IQ Gateway should be a metered gateway with CTs (current transformers) installed.

Question 17

What is the bundled SKU for the IQ Battery 5P?

Accepted Answer

The bundled SKU contains an IQ Gateway Metered (ENV-S-EM-230) with eSW 8.2.x pre-installed, a Communications Kit 2 INT (COMMS-KIT-INT-02), and two CT-100-SPLIT. Use of the bundled SKU allows easy procurement of all communications components in one box and enables the installer to save up to 50% on the commissioning time of the IQ Battery 5P due to the pre-loaded eSW.

Question 18

Can the IQ Battery be mounted on a wall?

Accepted Answer

Yes. The IQ Battery 5P is designed to be wall-mounted and includes the wall-mount bracket inside the box.

Question 19

Can the IQ Battery 5P be mounted on the floor?

Accepted Answer

Yes. The IQ Battery 5P can be floor-mounted using the IQ Battery 5P Pedestal Mount (SKU: B05-PM-0550-O). One pedestal is needed per battery.

Question 20

Do I need the pedestal mount on every site?

Accepted Answer

No. You only need a pedestal mount on sites where you want to floor-mount the battery.

Question 21

How many IQ Batteries can be installed in a system?

Accepted Answer

Up to 12 IQ Battery 5P units can be installed using a single IQ Gateway Metered, provided the installed power capacity is within the limit set by the local grid operator.

Question 22

Do I need to order one lifting handle set per battery?

Accepted Answer

No. The IQ Battery 5P lifting handles are reusable. You only need one set, and it can be used on multiple installations and for multiple batteries.

Question 23

In the IQ Battery 5P lifting handles box, I found two handles. Are they interchangeable?

Accepted Answer

No. The handles are designed to fit onto the left and the right side of the battery and need to be fitted that way due to the plunger that provides additional security during lifting.

Question 24

Is the IQ Battery 5P backup capable?

Accepted Answer

The current IQ Battery 5P system launched in the UK is only for grid-tied applications.

Question 25

What is the PE port on the Communications Kit?

Accepted Answer

You must connect a ground cable from the PE port to the main panel. It is needed to ground the drain wire from the control cable.

Question 26

What is the maximum length of control cable that can be used in a system?

Accepted Answer

The maximum length is 100 m.

Question 27

Where should I plug in the termination resistor connector?

Accepted Answer

The terminator resistor connector should be installed at both ends of the system in the control connector port.

Question 28

Why should the drain wire be connected on only one end?

Accepted Answer

When there are two paths to ground, current leakage can affect the characteristic impedance of the circuit and cause data-package loss. Hence, the drain wire should be connected only on one side.

Question 29

Why does IQ Battery 5P offer a 15-year warranty?

Accepted Answer

One of the Enphase key values is quality. Enphase has demonstrated its commitment to quality through eight generations of microinverters and two prior generations of battery products. The learnings associated with these products has enabled Enphase to offer another industry-leading warranty with our third-generation battery product.

Question 30

Where can I find technical documentation for the IQ Battery 5P?

Accepted Answer

Data sheets and other technical documents for the IQ Battery 5P can be found in the documentation centre.

Question 31

What training is required to install and commission the IQ Battery 5P?

Accepted Answer

Obtaining your Enphase Storage Installation Certification through Enphase University is a mandatory prerequisite to install and commission the IQ Battery 5P in the United Kingdom. Be sure to read the guidelines for your first installation.  In addition, you need to have a design review performed by Enphase prior to your first install.

Question 32

How long is the warranty?

Accepted Answer

IQ Battery 5P are backed by an industry-leading 15-year warranty up to 6,000 cycles as standard.

Question 33

How do I get support?

Accepted Answer

If your installers are on-site, you can reach our customer support at +44 3308088522, if you are not on-site, you can reach us by emailing support_uk@enphaseenergy.com.

Question 34

How do I purchase the IQ Battery 5P?

Accepted Answer

Installers can purchase the IQ Battery 5P from a local Enphase distribution partner. Visit the how to buy page to find a local distributor.

Question 35

Who should I contact for more information?

Accepted Answer

Web: https://enphase.com/en-gb/contact Email: support_uk@enphaseenergy.com Call: +44 (0) 3308088522

Question 36

Is the IQ Battery 5P compatible with M Series Microinverters on the same IQ Gateway?

Accepted Answer

M Series Microinverters are not directly compatible with the IQ Battery 5P. To make them compatible, you will need two IQ Gateways.

Question 37

If I add one IQ Battery 5P, connected to a single-phase on a three-phase system, how does the IQ Battery 5P discharge provide the power for loads on a different phase?

Accepted Answer

Charging or discharging to the grid is measured at the aggregate level. The IQ Battery will discharge on one phase to support the loads on different phases within the permissible limits set by the phase imbalance restrictions of the local grid operator.

Question 38

Does a single IQ Battery 5P charge with the power produced in all phases?

Accepted Answer

The IQ Battery 5P will charge with the power produced on all phases within the permissible limits set by the phase imbalance restrictions of the local grid operator.

Question 39

Can the IQ Battery 5P charge from the grid?

Accepted Answer

Yes. The IQ Battery 5P has a mode to charge from the grid. This can be enabled from the system settings in the Enphase Installer App or the Enphase App.

Question 40

Can I use a CAT5 Ethernet cable for the control communications?

Accepted Answer

CAT5 Ethernet cable cannot be used in lieu of a control cable. You must use an Enphase control cable or an approved third-party control cable to ensure reliable communication. Refer to product documentation for a list of approved control cables.

Question 41

Does the Enphase IQ Battery 5P support PV systems with all models of third-party string inverters?

Accepted Answer

The Enphase IQ Battery 5P is compatible with all models of string inverters.

Question 42

Does the IQ Battery 5P require a hybrid or standalone inverter to work with a third-party string inverter?

Accepted Answer

The IQ Battery 5P does not require a hybrid or standalone inverter because it is an AC-coupled product.

Question 43

Which other Enphase components do I need when I install an IQ Battery 5P with a third-party string inverter?

Accepted Answer

To integrate an IQ Battery 5P with an existing third-party inverter, you must install an IQ Gateway Metered, Consumption CTs, Production CTs, and a wired Communications Kit.

Question 44

If a string PV system already has third-party storage, can I still add an IQ Battery 5P?

Accepted Answer

IQ Batteries cannot be used alongside third-party storage products.

Question 45

Can IQ Batteries be installed with both single-phase and three-phase third-party string inverters?

Accepted Answer

Yes. Both single-phase and three-phase third-party string inverters are supported.

Question 46

How do I add third-party string inverter details to the Enphase system?

Accepted Answer

Third-party inverter details will be added by the installer during commissioning using the Enphase Installer App and will be visible in the Enphase App.

Question 47

If a PV system has both a third-party string inverter and an Enphase microinverter, can I add IQ Batteries?

Accepted Answer

Currently, Enphase does not support adding IQ Batteries to this configuration. We expect to support this configuration in the future.

Question 48

Does Enphase control the operation of the third-party string inverter?

Accepted Answer

Enphase does not control the third-party string inverter.

Question 49

Does Enphase support module-level monitoring for third-party string inverters?

Accepted Answer

Module-level monitoring is not supported for third-party inverters since the Production CT measures the total production from the third-party string inverter.

Question 50

How much charge does an IQ Battery 5P lose during the day?

Accepted Answer

After monitoring your batteries for a while, you may notice that they lose a small amount of charge even when you're not using them. This is normal and is something the industry calls tare loss. All home batteries will use some charge throughout the day to power standby systems like the Battery Management Controller or inverters. It's similar to an electric vehicle losing some range overnight, although the mechanics for why and how it happens are slightly different. This isn't unique to Enphase and is a part of all home batteries regardless of the manufacturer.  For every IQ Battery 5P in an Enphase Energy System, you may notice approximately 150-400 Wh of tare loss per day based on your battery profile. This may vary a bit from system to system depending on how often it's idle and not actively generating solar power. Because we always want to accurately represent where your energy is going, the charge and discharge trends in the app will update normally when this happens.

Question 51

Cos'è il pacchetto (bundled SKU) per l'IQ Battery 5P?

Accepted Answer

Il pacchetto contiene un IQ Gateway Metered (ENV-S-EM-230) con eSW 8.2.x preinstallato e un Communications Kit 2 INT (COMMS-KIT-INT-02).

Question 52

Se ho un sito esistente, devo acquistare il kit (ENV-IQ-GWM-CK2-INT-KIT)?

Accepted Answer

No. Per un sito esistente, è possibile continuare a utilizzare l'IQ Gateway esistente e collegare semplicemente il Communications Kit 2 INT (COMMS-KIT-INT-02). Tuttavia, l'IQ Gateway esistente deve essere il modello Metered, ovvero con TA (trasformatori di corrente) installati.

Question 53

Enphase supporta il monitoraggio a livello di modulo per gli inverter di stringa di terze parti?

Accepted Answer

Il monitoraggio a livello di modulo non è supportato per gli inverter di terze parti, poiché il Production Current Transformer misura la produzione totale dell'inverter di stringa di terze parti.

Question 54

Enphase controlla il funzionamento dell'inverter di stringa di terze parti?

Accepted Answer

Enphase non controlla l'inverter di stringa di terze parti.

Question 55

Se un impianto fotovoltaico di stringa dispone già di un sistema di accumulo di terze parti, è possibile aggiungere un IQ Battery 5P?

Accepted Answer

Le IQ Battery non possono essere utilizzate insieme a sistemi di accumulo di terze parti.

Question 56

Quali altri componenti Enphase sono necessari quando si installa un IQ Battery 5P con un inverter di stringa di terze parti?

Accepted Answer

Per integrare un IQ Battery 5P con un inverter di terze parti esistente è necessario installare un IQ Gateway Metered, Production e Consumption CTs, e un Communications Kit cablato.

Question 57

L'IQ Battery 5P richiede un inverter ibrido o aggiuntivo per funzionare con un inverter di stringa di terze parti?

Accepted Answer

L'IQ Battery 5P non richiede un inverter ibrido o aggiuntivo perché contiene già un'unità di conversione accoppiata lato AC.

Question 58

L'IQ Battery 5P di Enphase supporta impianti fotovoltaici con tutti i modelli di inverter di stringa di terze parti?

Accepted Answer

Enphase IQ Battery 5P è compatibile con tutti i modelli di inverter di stringa.

Question 59

È possibile utilizzare un cavo Ethernet CAT5 per le comunicazioni di controllo?

Accepted Answer

Non è possibile utilizzare un cavo Ethernet CAT5 al posto del cavo di controllo. Per garantire una comunicazione affidabile, è necessario utilizzare un cavo di controllo Enphase o un cavo di controllo di terze parti approvato. Per un elenco dei cavi di controllo approvati, consultare la documentazione del prodotto.

Question 60

L'IQ Battery 5P può essere caricata dalla rete?

Accepted Answer

Sì. L'IQ Battery 5P dispone di una modalità di ricarica dalla rete. Questa modalità può essere attivata dalle impostazioni del sistema nell'Enphase Installer App o nell'Enphase App.

Question 61

Una singola unità IQ Battery 5P si carica con l'energia prodotta in tutte le fasi?

Accepted Answer

IQ Battery 5P si caricherà con la potenza prodotta su tutte le fasi entro i limiti consentiti dalle restrizioni sullo squilibrio di fase del gestore di rete locale.

Question 62

Se aggiungo un'IQ Battery 5P, collegato su una singola fase di un sistema trifase, in che modo la scarica dell'IQ Battery 5P fornisce l'energia ai carichi su una fase diversa?

Accepted Answer

La carica o la scarica sulla rete viene misurata a livello aggregato. L'IQ Battery si scaricherà su una fase per supportare i carichi su fasi diverse entro i limiti consentiti dalle restrizioni sullo squilibrio di potenza della norma di connessione.

Question 63

Dove si acquista un'IQ Battery 5P?

Accepted Answer

Gli installatori possono acquistare l'IQ Battery 5P presso un partner di distribuzione Enphase locale. Per trovare un distributore locale, visitare la pagina Come acquistare.

Question 64

Come si ottiene assistenza?

Accepted Answer

Se i vostri installatori sono in loco, potete contattare il nostro servizio di assistenza clienti al numero +39 800 593 838; se non siete in loco, potete contattarci inviando un'e-mail a support_italy@enphaseenergy.com.

Profundidad	7.4 in
Ancho	21.7 in
Alto	38.6 in
Peso	174 lb