Question 1

Which configurations support load control?

Accepted Answer

All configurations with IQ System Controllers support load control. For Sunlight Backup, an essential loads solution is required. Please see the Sunlight Backup with IQ8 tech briefs for additional details.

Question 2

Can IQ8 Series Microinverters operate with the IQ Battery deployed in the field?

Accepted Answer

Yes. IQ8 microinverters can operate with all 4 SKUS of IQ Battery i.e., IQ Battery 3, IQ Battery 10, IQ Battery 3T, and IQ Battery 10T.

Question 3

Why does the IQ Gateway (formally known as IQ Gateway) need to be wired directly to the IQ System Controller 2 in grid forming systems with IQ8 solar microinverters?

Accepted Answer

Traditionally, in grid tied microinverter systems and Ensemble 1.0 systems, the Gateway/Envoy PCBA is powered L1-N and is connected to L1 and L2 for metering. Envoy is powered from the IQ Combiner busbar.In an IQ8 PV grid agnostic system, the IQ8 PV can form a grid behind an open PV relay in IQ System Controller. If IQ Gateway were powered via the IQ Combiner busbar and the PV relay is opened, the IQ Gateway can be damaged. This is because neutral from IQ System Controller (either from grid or from IQ battery via auto transformer) is not referenced to the L1 and L2 from microinverters. IQ Gateway could see L-N voltages of up to 360 V which can damage the IQ Gateway circuitry.So, for IQ 8 systems, the IQ Gateway breaker inside the IQ Combiner must not be used to power the IQ Gateway and the procedure described below must be followed.For IQ8 installations, there are three ways of installing the IQ Gateway breaker:Option 1: Remove the IQ Gateway breaker from the IQ Combiner and put it into the generator breaker space in the IQ System Controller 2 for IQ Gateway connection if generator is not present.Option 2: Remove the IQ Gateway breaker from IQ Combiner and put it in a backed-up subpanel if it is available nearby and has space for the double pole breaker.Option 3: If subpanel is far away and a generator is used then replace the BR240 autotransformer breaker with a quad-breaker BRK-20A40A-2P-240V (Eaton SKU: BQC220240) and connect the IQ Gateway to the outer poles of the quad breaker. Reconnect the autotransformer wires to the inner poles of the quad breaker. Refer to  IQ System Controller 2 Install Guide  for details.

Question 4

What are the grid interconnection voltages supported by IQ8 Series Microinverters?

Accepted Answer

All IQ8 Microinverters operate at 240V L-L AC voltage interconnection, except IQ8H-208 which operates only at split-phase 208V L-L interconnection.

Question 5

What type of PV modules are supported by IQ8 Microinverters?

Accepted Answer

IQ8 Microinverters (IQ8+, IQ8M, IQ8A, IQ8H-240 and IQ8H-208) supports 54-cell/108 half-cell, 60-cell/120 half-cell, 66-cell/132 half-cell and 72-cell/144 half-cell PV modules if they are electrically compatible.Please refer Enphase Module Compatibility calculator to check the compatibility.

Question 6

Can I pair IQ8 Series Microinverters with bifacial solar modules?

Accepted Answer

You can pair Enphase IQ8 Microinverters with bifacial solar modules if they are electrically compatible and installed according to the Quick Installation Guide supplied with the microinverters.In case if there is no mandatory regulation for inverter sizing by the local utilities, use the microinverter sizing methodology of a conventional mono-facial module. However, use the real power (gained power) rather than the nominal power of the bifacial solar module. For example, if a 20% gain is expected, then refer to the module output parameters associated with the 20% gain instead of the nameplate rating of the module.You can always use the Enphase Module Compatibility calculator to feed-in the module output parameters and check the compatibility.

Question 7

Is there a new cabling system designed for IQ8 Series Microinverters?

Accepted Answer

Enphase IQ8 Microinverters are compatible with existing IQ cabling system which is currently being used with existing IQ6 and IQ7 series microinverters providing similar installer experience.Note: IQ8D micros require a special cable. Please refer to the IQ8D webpage for details.

Question 8

Can IQ8 Series Microinverters be installed with IQ7 Microinverters in the same system?

Accepted Answer

IQ8 Series Microinverters can be added to existing IQ7 systems on the same IQ Gateway/IQ Combiner only in the following configurations: (i) Solar Only or (ii) Solar + Battery (IQ Battery 3/10 or IQ Battery 3T/10T or IQ Battery 5P) grid-tied or with backup with IQ System Controller 3/3G/3M + IQ Meter Collar. We cannot expand existing IQ8 systems with IQ7 Series Microinverters. For further details, please refer to the Quick Installation Guide.

Question 9

What is the limited warranty period for IQ8 Series Microinverters?

Accepted Answer

IQ8 Series Microinverters come with a 25-year limited warranty in North America.

Question 10

How will a three-phase IQ8 Series Microinverters Enphase Energy System design differ from a three-phase IQ7+ Enphase Energy system design?

Accepted Answer

A three-phase IQ7+ system utilizes the IQ7+ Microinverter, Enphase Q Cable (2-wired cable) and the Enphase IQ Gateway Commercial – either standalone or as part of the Enphase Three Phase Network Protection Relay (TPNPR) to provide loss of phase detection. Phase balancing in a three-phase IQ7+ system requires allocating the branch circuits equally across the three phases in the PV aggregation panel.			A three-phase IQ8 Commercial microinverter system utilizes the IQ8P-3P or IQ8HC-3P microinverter, the Enphase QD Cable (4-wired cable) and the Enphase IQ Gateway Commercial 2. In no circumstance is the Enphase TPNPR required on an IQ8 Commercial PV system. The QD Cable provides Auto Phase Rotation and Neutral Sense Capabilities. Please visit the IQ8 Commercial information page for configuration diagrams.

Question 11

What are the features of a Commercial Enphase Energy System?

Accepted Answer

The Enphase IQ8 Commercial PV System is a grid-tied, three-phase, 208V PV solution that will be fully compliant with IEEE1547:2018 standards upon release. Each IQ8 Commercial microinverter, either the IQ8P-3P or IQ8HC-3P, connects to a single PV module and integrates with the Enphase IQ Commercial Gateway 2 and Enphase monitoring and analysis software. The IQ8 Commercial PV System will offer system-level rapid shutdown compliance with UL-listed PV modules; offers advanced grid functionalities, voltage and frequency ride through, and neutral sense capabilities.

Question 12

Will installers use the same commissioning and monitoring software for Commercial Enphase Energy Systems as I do for other Enphase installations?

Accepted Answer

Yes, you will use the same commissioning application for IQ8 Commercial PV Systems and you will be able to monitor your entire fleet of installed systems, irrespective of individual site type or microinverter. In anticipation of IQ8 Commercial, Enphase plans to rollout advanced fleet management and kiosk features to our existing software application in 2022. These new features will be accessed through your existing dashboard and login credentials.

Question 13

Will system owners use the same Enphase App to monitor their Commercial Enphase Energy System as their home energy system?

Accepted Answer

Yes, all system owners will utilize the same app, irrespective of system type. Owners with multiple systems can access all their Enphase systems from a single login to the Enphase App.

Question 14

What are the power output levels of IQ8P-3P and IQ8H-3P?

Accepted Answer

IQ8 Commercial Microinverters will be available in two variants: IQ8P-3P with 475 W maximum continuous output power (480 W, peak power), and IQ8H-3P with 380 W maximum continuous output power (384 W, peak power).

Question 15

What modules will be compatible with the Commercial Enphase Energy System?

Accepted Answer

IQ8 Commercial microinverters are compatible with high-power modules from 54-cell up to 72-cell with full or cut-cell configuration.

Question 16

Is the Commercial Enphase Energy System grid-forming capable?

Accepted Answer

No, IQ8 Commercial PV systems will be grid-tied only upon release Spring 2023.

Question 17

Where can I find more information on the IQ8P-3P and IQ8H-3P from Commercial Enphase Energy Systems?

Accepted Answer

Please visit our IQ8 Commercial page here:			https://enphase.com/installers/commercial

Question 18

Does Enphase offer any design-related services to Commercial Enphase Energy System installers?

Accepted Answer

Enphase is currently offering, for a limited time, design reviews at no charge for commercial systems. Separately, a select set of Enphase Installer Network (EIN) installers can now procure comprehensive design services from Enphase.If you’re interested in procuring design services for prospective commercial projects using IQ7+ Series or IQ8 Series Microinverters, please reach out to your Enphase regional sales manager.

Question 19

Are the IQ8P-3P and IQ8H-3P high-power three-phase residential versions of the IQ8 series microinverters?

Accepted Answer

No, the IQ8P-3P and IQ8H-3P constitute a separate commercial product line designed specifically for three-phase installations only. The IQ8 Commercial Microinverters feature an entirely different form factor and mounting bracket and are only compatible with the three-phase QD Cable and IQ Commercial Gateway 2. IQ8 series microinverters used for residential purposes are only compatible with single/split-phase systems utilizing Enphase Q Cable and IQ Gateway.

Question 20

Will the Commercial Enphase Energy System be compatible with other battery storage in the market?

Accepted Answer

Enphase has not evaluated nor tested the integration of the IQ8 Commercial PV System with any 3rd-party single-phase or three-phase battery solution and cannot support installations where three-phase solar PV and 3rd-party storage integration are required.

Question 21

Will Enphase also launch a three-phase commercial battery solution?

Accepted Answer

Enphase is evaluating storage solutions for three-phase applications. We look forward to providing an update in the future.

Question 22

What three-phase commercial solutions does Enphase offer to installers?

Accepted Answer

Installers can currently deploy Enphase solutions for three-phase electrical service customers utilizing the Enphase IQ7+, Q Cable and IQ Commercial Gateway. This provides a 208V three-phase solar PV solution compatible with 208V three-phase electrical main service panels and 480V electrical main service panels when the PV is connected to the low side of a 480-208 transformer. For locations requiring loss of phase detection. The Enphase Three Phase Network Protection Relay, which includes the IQ Commercial Gateway, offers loss of phase detection for sites that need it.

Question 23

Can I use IQ8, IQ8A, IQ8M, or IQ8+ Microinverters in a Commercial Enphase Energy System?

Accepted Answer

No. These microinverter models are not tested for three-phase applications and are not UL Listed. Only IQ8P-3P and IQ8H-3P Microinverters are compatible with a Commercial Enphase Energy System.

Question 24

What are the improvements in the IQ8 Series Microinverter firmware release 2.48.01?

Accepted Answer

This firmware release upgrades the DC input specifications of IQ8 Series Microinverters, making them suitable for pairing with solar modules with higher currents.•  Maximum continuous DC current increased to 12 A (previously 10.6 A)•  Wider operating voltage range of 16-58 V (previously 25-58 V)•  Improved power tracking with wider MPPT voltage range•  Start-up voltage lowered to 22 V (previously 30 V)

Question 25

How can installers tell if the firmware has been updated?

Accepted Answer

In the Enphase Installer Portal (formally known as Enlighten Manager):1. Click on “Systems” tab2. Select a system from the list3. Click the “Devices” tab4. The "Processor Load" column will show the existing firmware version

Question 26

How should I document model numbers in permits and plan sets?

Accepted Answer

Enphase recommends installers submit Enphase microinverter model numbers on permits and plan sets using an “-x” in place of either the “-2” or “-M”, and add “where x = 2 or M.”For example: “Model Number: IQ7-60-x-US, where x = 2 or M” or “IQ8PLUS-72-x-US, where x = 2 or M.”

Question 27

While ordering microinverters with integrated MC4 connectors, do I get Q-DCC-2 adapter cable too?

Accepted Answer

Microinverters with integrated MC4 connectors will not be shipped with a Q-DCC-2 adapter cable, as they are no longer necessary.

Question 28

Are there any special installation instructions for microinverters with integrated MC4 connectors?

Accepted Answer

There are no special instructions for microinverters with integrated MC4 connectors. Please follow the same installation practices as outlined in the Enphase installation manual.

Question 29

What are the product numbers of microinverters with MC4 connectors?

Accepted Answer

This table lists the existing product SKU numbers and their equivalent integrated MC4 connector counterparts.									IQ Microinverter with adapter cable (Q-DCC-2)									IQ Microinverter with integrated MC4 connector										IQ7-60-2-US			IQ7-60-M-US							IQ7PLUS-72-2-US			IQ7PLUS-72-M-US							IQ7A-72-2-US			IQ7A-72-M-US							IQ8-60-2-US			IQ8-60-M-US							IQ8PLUS-72-2-US			IQ8PLUS-72-M-US							IQ8M-72-2-US			IQ8M-72-M-US							IQ8A-72-2-US			IQ8A-72-M-US							IQ8H-240-72-2-US			IQ8H-240-72-M-US							IQ8H-208-72-2-US			IQ8H-208-72-M-US

Question 30

Is there a difference in cost between microinverters with integrated connectors and microinverters using adapter cables?

Accepted Answer

No, there is no price difference between the microinverters that have integrated MC4 connectors and those that use adapter cables.

Question 31

Will microinverters requiring MC4 adapter cables be phased out completely?

Accepted Answer

Yes, all microinverters will eventually have integrated MC4 connectors. We are gradually transitioning each inverter in a phased manner.

Question 32

When can I purchase components for a Commercial Enphase Energy System from distributors?

Accepted Answer

We are targeting availability in November 2023.

Question 33

¿Se pueden instalar IQ8 Series Microinverters con IQ7 Series Microinverters en el mismo sistema?

Accepted Answer

Los IQ8 Series Microinverters sólo pueden añadirse a sistemas IQ7 existentes en la misma IQ Gateway/IQ Combiner/IQ System Controller en las siguientes configuraciones: (i) Solo solar y (ii) Solar + batería (IQ Battery 3/10 o IQ Battery 3T/10T  o IQ Battery 5P) conectada a la red o con respaldo con IQ System Controller 3/3G/3M + IQ Meter Collar. No podemos ampliar los sistemas IQ8 existentes con los IQ7 Series Microinverters. Para obtener más detalles, consulte la Guía de instalación rápida.

Question 34

Which gateway do I use with a commercial and industrial (C&I) microinverter?

Accepted Answer

The IQ8P-3P and IQ8H-3P Microinverters constitute a separate commercial product line designed specifically for three-phase installations with a neutral connection (120/208 VAC Wye).IQ Gateway Commercial 2 (ENV2-IQC2-AM3-3P) is the only gateway compatible with Enphase C&I microinverters. Note: The IQ Gateway Commercial 2 is incompatible with any other Enphase microinverter series except IQ8 Commercial Microinverters (IQ8P-3P and IQ8H-3P).

Question 35

How do I determine which SKU to use based on my module?

Accepted Answer

Refer to the Enphase compatibility calculator to check the compatibility of the IQ8 Commercial Microinverters with any PV module. IQ8P-3P is commonly paired with modules with power rating between 380 W to 640 W.

Question 36

Can the IQ8-3P Microinverter be installed on a system with an AC-coupled battery?

Accepted Answer

Enphase has tested several types of battery systems successfully; however, each battery has site-specific configuration requirements. To discuss your use case, contact the Enphase engineering team with your project details, proposed wiring diagrams, assumed operating parameters, and utility interconnection agreement.

Question 37

What is the best way to build a BOM?

Accepted Answer

Enphase offers a specialized system builder tool for commercial PV systems, which helps you view system components, system overview, and essential tips. The system builder can be accessed at https://enphase.com/installers/systems.

Question 38

Do I need to have branches where the string is divisible by 3?

Accepted Answer

No. However, power balance across the connected phases may have to be achieved based on your local utility interconnection requirements.

Question 39

What is the maximum number of inverters on each side of the center-tap connector?

Accepted Answer

All QD Cable variants come with a center-tap connector positioned after every sixth Field Wireable QD Connector (male) for microinverter connection. In some sites, there could be a scenario where the starting point for a circuit is not the first connector in the circuit. Select the center-tap connector such that a maximum of nine IQ8 Commercial Microinverters are installed on each side of the center-tap connector to limit the voltage rise in the QD Cable to

Question 40

Can IQ8 Series Microinverters operate with the IQ Battery deployed in the field?

Accepted Answer

Yes. IQ8 microinverters can operate with all 4 SKUS of IQ Battery i.e., IQ Battery 3, IQ Battery 10, IQ Battery 3T, and IQ Battery 10T.

Question 41

Why does the IQ Gateway (formally known as IQ Gateway) need to be wired directly to the IQ System Controller 2 in grid forming systems with IQ8 solar microinverters?

Accepted Answer

Traditionally, in grid tied microinverter systems and Ensemble 1.0 systems, the Gateway/Envoy PCBA is powered L1-N and is connected to L1 and L2 for metering. Envoy is powered from the IQ Combiner busbar.In an IQ8 PV grid agnostic system, the IQ8 PV can form a grid behind an open PV relay in IQ System Controller. If IQ Gateway were powered via the IQ Combiner busbar and the PV relay is opened, the IQ Gateway can be damaged. This is because neutral from IQ System Controller (either from grid or from IQ battery via auto transformer) is not referenced to the L1 and L2 from microinverters. IQ Gateway could see L-N voltages of up to 360 V which can damage the IQ Gateway circuitry.So, for IQ 8 systems, the IQ Gateway breaker inside the IQ Combiner must not be used to power the IQ Gateway and the procedure described below must be followed.For IQ8 installations, there are three ways of installing the IQ Gateway breaker:Option 1: Remove the IQ Gateway breaker from the IQ Combiner and put it into the generator breaker space in the IQ System Controller 2 for IQ Gateway connection if generator is not present.Option 2: Remove the IQ Gateway breaker from IQ Combiner and put it in a backed-up subpanel if it is available nearby and has space for the double pole breaker.Option 3: If subpanel is far away and a generator is used then replace the BR240 autotransformer breaker with a quad-breaker BRK-20A40A-2P-240V (Eaton SKU: BQC220240) and connect the IQ Gateway to the outer poles of the quad breaker. Reconnect the autotransformer wires to the inner poles of the quad breaker. Refer to  IQ System Controller 2 Install Guide  for details.

Question 42

What is the limited warranty period for IQ8 Series Microinverters?

Accepted Answer

IQ8 Series Microinverters come with a 25-year limited warranty in North America.

Question 43

How will a three-phase IQ8 Series Microinverters Enphase Energy System design differ from a three-phase IQ7+ Enphase Energy system design?

Accepted Answer

A three-phase IQ7+ system utilizes the IQ7+ Microinverter, Enphase Q Cable (2-wired cable) and the Enphase IQ Gateway Commercial – either standalone or as part of the Enphase Three Phase Network Protection Relay (TPNPR) to provide loss of phase detection. Phase balancing in a three-phase IQ7+ system requires allocating the branch circuits equally across the three phases in the PV aggregation panel.			A three-phase IQ8 Commercial microinverter system utilizes the IQ8P-3P or IQ8HC-3P microinverter, the Enphase QD Cable (4-wired cable) and the Enphase IQ Gateway Commercial 2. In no circumstance is the Enphase TPNPR required on an IQ8 Commercial PV system. The QD Cable provides Auto Phase Rotation and Neutral Sense Capabilities. Please visit the IQ8 Commercial information page for configuration diagrams.

Question 44

What are the features of a Commercial Enphase Energy System?

Accepted Answer

The Enphase IQ8 Commercial PV System is a grid-tied, three-phase, 208V PV solution that will be fully compliant with IEEE1547:2018 standards upon release. Each IQ8 Commercial microinverter, either the IQ8P-3P or IQ8HC-3P, connects to a single PV module and integrates with the Enphase IQ Commercial Gateway 2 and Enphase monitoring and analysis software. The IQ8 Commercial PV System will offer system-level rapid shutdown compliance with UL-listed PV modules; offers advanced grid functionalities, voltage and frequency ride through, and neutral sense capabilities.

Question 45

Will installers use the same commissioning and monitoring software for Commercial Enphase Energy Systems as I do for other Enphase installations?

Accepted Answer

Yes, you will use the same commissioning application for IQ8 Commercial PV Systems and you will be able to monitor your entire fleet of installed systems, irrespective of individual site type or microinverter. In anticipation of IQ8 Commercial, Enphase plans to rollout advanced fleet management and kiosk features to our existing software application in 2022. These new features will be accessed through your existing dashboard and login credentials.

Question 46

Will system owners use the same Enphase App to monitor their Commercial Enphase Energy System as their home energy system?

Accepted Answer

Yes, all system owners will utilize the same app, irrespective of system type. Owners with multiple systems can access all their Enphase systems from a single login to the Enphase App.

Question 47

Will the Commercial Enphase Energy System be compatible with other battery storage in the market?

Accepted Answer

Enphase has not evaluated nor tested the integration of the IQ8 Commercial PV System with any 3rd-party single-phase or three-phase battery solution and cannot support installations where three-phase solar PV and 3rd-party storage integration are required.

Question 48

What three-phase commercial solutions does Enphase offer to installers?

Accepted Answer

Installers can currently deploy Enphase solutions for three-phase electrical service customers utilizing the Enphase IQ7+, Q Cable and IQ Commercial Gateway. This provides a 208V three-phase solar PV solution compatible with 208V three-phase electrical main service panels and 480V electrical main service panels when the PV is connected to the low side of a 480-208 transformer. For locations requiring loss of phase detection. The Enphase Three Phase Network Protection Relay, which includes the IQ Commercial Gateway, offers loss of phase detection for sites that need it.

Question 49

How can installers tell if the firmware has been updated?

Accepted Answer

In the Enphase Installer Portal (formally known as Enlighten Manager):1. Click on “Systems” tab2. Select a system from the list3. Click the “Devices” tab4. The "Processor Load" column will show the existing firmware version

Question 50

While ordering microinverters with integrated MC4 connectors, do I get Q-DCC-2 adapter cable too?

Accepted Answer

Microinverters with integrated MC4 connectors will not be shipped with a Q-DCC-2 adapter cable, as they are no longer necessary.

Question 51

Are there any special installation instructions for microinverters with integrated MC4 connectors?

Accepted Answer

There are no special instructions for microinverters with integrated MC4 connectors. Please follow the same installation practices as outlined in the Enphase installation manual.

Question 52

What are the product numbers of microinverters with MC4 connectors?

Accepted Answer

This table lists the existing product SKU numbers and their equivalent integrated MC4 connector counterparts.									IQ Microinverter with adapter cable (Q-DCC-2)									IQ Microinverter with integrated MC4 connector										IQ7-60-2-US			IQ7-60-M-US							IQ7PLUS-72-2-US			IQ7PLUS-72-M-US							IQ7A-72-2-US			IQ7A-72-M-US							IQ8-60-2-US			IQ8-60-M-US							IQ8PLUS-72-2-US			IQ8PLUS-72-M-US							IQ8M-72-2-US			IQ8M-72-M-US							IQ8A-72-2-US			IQ8A-72-M-US							IQ8H-240-72-2-US			IQ8H-240-72-M-US							IQ8H-208-72-2-US			IQ8H-208-72-M-US

Question 53

Is there a difference in cost between microinverters with integrated connectors and microinverters using adapter cables?

Accepted Answer

No, there is no price difference between the microinverters that have integrated MC4 connectors and those that use adapter cables.

Question 54

Will microinverters requiring MC4 adapter cables be phased out completely?

Accepted Answer

Yes, all microinverters will eventually have integrated MC4 connectors. We are gradually transitioning each inverter in a phased manner.

Question 55

Can the existing IQ Commercial Gateway 2 be used with IQ9 Series Commercial Microinverters?

Accepted Answer

The existing IQ Commercial Gateway 2 is only compatible with the IQ8P-3P and IQ9N-3P-208 microinverters, which operate on a 208V AC, 60 Hz grid configuration. A new IQ Gateway Commercial 3 will be available, which will be compatible with both IQ8 and IQ9 commercial microinverters operating on 208V AC and 480V AC, 60 Hz grids.

Question 56

What are the key features of IQ Gateway Commercial 3?

Accepted Answer

Compared to IQ Gateway Commercial 2, the IQ Gateway Commercial 3 adds RS-485 support to integrate with third-party energy meters using Modbus protocol, plus an additional Ethernet port for a dedicated utility connection. The gateway also comes with a 15-year limited warranty.

Question 57

What do LEDs on the IQ Envoy or IQ Gateway mean?

Accepted Answer

What do LEDs on the IQ Envoy or IQ Gateway mean?

Question 58

How to use the “Validation” step in the Enphase Installer App to check the status of microinverters

Accepted Answer

How to use the “Validation” step in the Enphase Installer App to check the status of microinverters

Question 59

Can my system produce power on a cloudy day?

Accepted Answer

Can my system produce power on a cloudy day?

Question 60

How much power should my array produce?

Accepted Answer

How much power should my array produce?

Question 61

Why Is my solar panel rating higher than my microinverter rating?

Accepted Answer

Why Is my solar panel rating higher than my microinverter rating?

Question 62

How do I upgrade my system with the latest generation microinverters?

Accepted Answer

How do I upgrade my system with the latest generation microinverters?

ALTURA	265 mm
ANCHURA	200 mm
PROFUNDIDAD	35 mm
PESO	1.6 kg

IQ8P-3P Microinverter